Author Topic: White plastic packer solution (maybe) (Read 42007 times)

Trixter · « **Reply #25 on:** July 22, 2007, 12:27:48 AM »

nope nothink there on either of them i dont think there was when i got them lol

Dark Knight · « **Reply #26 on:** July 22, 2007, 02:15:43 AM »

One of my white plastic bricks fall out minuets after I started walking on them !

I taped them in now !

GRS · « **Reply #27 on:** July 22, 2007, 02:20:10 AM »

the 1st gens didn't have the plastic t shape so you may have them $:-\$

Trixter · « **Reply #28 on:** July 22, 2007, 02:20:47 AM »

i dont think i even got white bricks im quite gd at noticin random things like that, like i noticed my freinds had the gen 1s n i had gen 2s n had to explain it too them their quite slow took awhile for them to catch on what bit was different lol. myne dont seem to be makin anyweird noises so im assuming there ok i may put sumithink in ther to be safe at sumpoint will probs do it when i freshen up the tape on my springs and spray them for london

Trixter · « **Reply #29 on:** July 22, 2007, 02:22:56 AM »

are the gen ones the ones that are straight into the hoove or the ones with the slight curve bit before hand. the metal round the spring goin to my hoove is completly flush and straight

Dark Knight · « **Reply #30 on:** July 22, 2007, 09:57:12 AM »

Quote from: Trixster on July 22, 2007, 02:22:56 AM

are the gen ones the ones that are straight into the hoove or the ones with the slight curve bit before hand. the metal round the spring goin to my hoove is completly flush and straight

The plastic brick should be between the spring and the rubber that cover it ( rubber streches and why they fall out :/ ).
If you have the little green manual it goes behind ' Part 7 ' ( repair manual ). It's not show but that's where it goes !

Jason · « **Reply #31 on:** July 22, 2007, 09:09:15 PM »

Quote from: Trixster on July 22, 2007, 02:22:56 AM

are the gen ones the ones that are straight into the hoove or the ones with the slight curve bit before hand. the metal round the spring goin to my hoove is completly flush and straight

This post shows the difference

http://www.projumpforum.co.uk/index.php?topic=554.0

adrenalize · « **Reply #32 on:** August 24, 2007, 01:46:58 PM »

Any update on the solution yet??

webmaster · « **Reply #33 on:** August 24, 2007, 02:08:58 PM »

Now available

Please email dan@ukgooddeals.com with your original order number, name & address for replacements

thank you

shazza_smurf · « **Reply #34 on:** September 06, 2007, 04:21:49 PM »

Hello

One of my T bars fell completely out which i have managed to fit back in ok..... however when i looked at the other Stilt... the T bar at the back of it, it seems to have dropped and not falling out as the rivets seem to be stopping it fall out, is the T bar supposed to be pushed back up or left as it is? I have tryed to push it back up with a screwdriver but isnt budging. Does this mean i have to take the spring off? and if so is it easy to do?

Cheers peeps..... gonna make some of my own i think...... tape and Glue FTW

Shaz

Paul-Self · « **Reply #35 on:** September 06, 2007, 05:14:36 PM »

what i did was i got one of those pro jump info cards folded it up and in blue peter fashion grabbed some pva glue coated it with it so it went half then slotted it in place and then put tape around it and it hasnt moved since =)

webmaster · « **Reply #36 on:** September 06, 2007, 06:16:06 PM »

Pro-Jump Info Card... Ahem Ahem aren't u meant to hand those out to potential new bockers!

Replacements are available from us by emailing Dan@ukgooddeals.com with your name, address and order number

Paul-Self · « **Reply #37 on:** September 06, 2007, 07:20:35 PM »

it was a old one that had been in my bag for a long time dont worry but it did a really good job

webmaster · « **Reply #38 on:** September 06, 2007, 09:37:12 PM »

Don't go giving people ideas lol

Sx Nutta · « **Reply #39 on:** September 06, 2007, 10:41:37 PM »

I can't find a invoice with my order number on it, does it mean I have to pay for mine?

webmaster · « **Reply #40 on:** September 06, 2007, 11:54:22 PM »

PM me ur postal details -Ill see what we can do

Benny B aka Hero MC · « **Reply #41 on:** February 26, 2009, 03:39:33 AM »

OH SNAP! dats wot dat rattling sound is?
ive had a probs wiv my left stilt afters a few hours use but cudnt figure wot it woz!
ur f**kin ace man! cheers

Spud · « **Reply #42 on:** February 26, 2009, 03:50:27 AM »

Hey,
There are actually a few things that might be causing the probs. If spacers are not missing then this isnt the prob, but just check they are not loose.

Most people's bocks develop a click after a few hours. Check all the bolts and stuff are done up tight (but not too tight) and see if that sorts it. But I would say the most likely cause of the problem is with bushings. If they are plastic they wear pretty quick. Its not a huge problem but bocks feel nicer if they are solid so you might wanna get some new ones.

A guy called Jason on here makes his own special ones. But unless you can do that there is no real solution. Although, I do recall a thread about gluing them in.

Dark Knight · « **Reply #43 on:** February 26, 2009, 05:27:03 AM »

Spud is right about checking the washers. But if that is the problem I don't think that it's wise to glue them together as they are a load bearer washer and wouldn't last.
Here's a topic about these washes.
http://www.projumpforum.co.uk/index.php?topic=983.0

Spud · « **Reply #44 on:** February 26, 2009, 10:27:30 AM »

Dk, this is the thread I was looking for.
http://www.projumpforum.co.uk/index.php?topic=1271.15
Not quite glue, resin. But it seems if you do it right the results are good.

And just so people don't get confuzzled...

^^^^bearings/bushings

^^^Washers

And I found the topic about the bushings/bearings Jason made.
http://www.projumpforum.co.uk/index.php?topic=826.0

Jason · « **Reply #45 on:** February 27, 2009, 12:02:44 AM »

I have a big bag of various thickness packers Benny I will stick them in my bag for the weekend and see if we can stop your rattle

Jason

Benny B aka Hero MC · « **Reply #46 on:** February 27, 2009, 01:37:22 AM »

much appreciated jason!!!
I look forward to my first group sesh. shud be good!

madmonky13 · « **Reply #47 on:** March 17, 2010, 06:23:10 PM »

you could use a milk bottle as well but you will have to use more than 1 layer

jordan

mandy077 · « **Reply #48 on:** October 09, 2010, 06:58:56 PM »

hi
having probs wiv my jumps, ive noticed my white spacer is there but its rite up in the spring cover n was wondring if i just taped another bit so its under the black tube bit ( i dnt no wot is reil called lol )
at the mo im very unstablie since ive changed the spring n ive tried every thing ppl ave sed lol

all part of the fun x

Locky · « **Reply #49 on:** October 10, 2010, 10:38:42 AM »

Your instability will not be anything to do with the white spacer but if you are worried about it then please take a pic and post it up so we can see.

As for your jumping it usually just comes down to practice practice and more practice but again if you can get a video of you jumping then we should be able to offer some tips

Welcome to the PJ forum!

News:

Author Topic: White plastic packer solution (maybe) (Read 42007 times)

Dark Knight

Dark Knight

Dark Knight