EVO binding thread

[Bbmthbloke]

NO not a load of posts.


The screw that holds the wide pad on the rear binding to the thin strap has dropped out.

Does any1 know/ could find out what gauge the thread is, then I can pop round B&Q and try and get a replacement


ta

[Spud]

Assuming  you still have one on your other bock i guess you could just take it with you?

[Bbmthbloke]

yep    , but, still gotta look into a plastic bubble pack and compare, and knowing me Id get it wrong. So if some1 does know the answer it might save me a lil bit of bother, worry and a couple of quid

[Spud]

As I see. I usually go to an independent (more helpful and knowledgeable I find) show them what I need and see if they can find it. Thats what I expected you to do lol

[sprog]

Just take the bolt to B&Q and ask someone Q, they should be able to help you. If they can't, try one of the smaller independent stores around Bournemouth.

[Jason]

I've got a set of the PJ black and silver ones here Q but not sure if they are the ones you mean

Can you stick a pic up on here so I can see which screw you mean and what the bindings are like

It will be a metric thread and most are 4, 5 or 6mm so if it is the same as mine I can give you a set of measurements but wheather B&Q staff will understand them is another matter 

Jason 

[Jason]

Oops double post  

Just measured it Q and the one on the PJ black and silver ones is a 6mm thread and it's 10mm long

The head is what they call a Gutter Bolt (it's used on cast iron gutters )

So if it's the same you can get them at any good hardwear store

Jason 

[dark-castles2]

Google it Although I just tried that and it brought me back to this thread hmm... this is indeed just a pointless post then. sorry for not helping :S

[Bbmthbloke]

ta folks