moving foot plate

[lynch]

im planing on making a moving foot plats for my A2 project
but i need pics of the foot plate, the manual or if anyone could lend me a moving foot plate i only need the one to look at and you will get it back if any one could help me pm me

[Bexx]

your best asking the Almighty Jason Boc Doc .....

I saw his hybrid bocks the other weekend..... they are sweeeeeeeeet as cherrry pie

[darfgarf]

just remember if you intend to use em, make sure they're strong and not made from the scrap metal bin 

[lynch]

i will be making them for use but do really need a example to work from i hope it all works out

[Jason]

I take it you have access to a machine shop lynch and can read a drawing

I did some sketches of the moving foot before I made one so I'll have a look and see if I can find them

To make them work you will need to make 3 bits for each foot

A back section, a front section and the bar that attaches to the footplate adjustment rods

I did drawings of the first two but the third one I just copied

Jason 

[lynch]

would be be able to bring them to CB please

[Jason]

Yep Mate I had forgotton about this I shall search out the drawings and you can take all the pics you want 

See you there

Jason