Pro-Jump Calf Cuffs... coming soon

[Athoul]

End of September, beginning of October.

Price is still undecided at the moment

[Jack]

can't wait hope there not too exspensive tho

Jack

[aidanh1]

oo wernt it jason or sumone that made some like that calfies i fink they were

[Jack]

yer i think ur rite wernt they 'cuffies'?

Jackk

[sprog]

oo wernt it jason or sumone that made some like that calfies i fink they were

Yeah, Jason made cuffies.
http://www.projumpforum.co.uk/index.php?topic=1088.0

[aidanh1]

ooo did he paitent protect them XD

did projump get the idea off him or have they been planing it for ages or just a thing that poped into sumones head wifout knowin bout jasons

[sprog]

ooo did he paitent protect them XD

did projump get the idea off him or have they been planing it for ages or just a thing that poped into sumones head wifout knowin bout jasons

Well as Jason's appeared AFTER the poweriSer 2007 cuffs, I would suspect he copied the idea from them. And poweriSer copied them from velocity motion stilts.
I suspect Pro Jump have also got the idea from poweriSer and VMS.

[Athoul]

ooo did he paitent protect them XD =

I thought Jeff Jay had them patent protected, but then poweriser copied them and now projump has copied them. So i'm completly lost   

[sprog]

I thought Jeff Jay had them patent protected

Indeed he does, which is why the poweriSer ones cost so much separate. I suspect the same will occur with projumps.

[bobman]

sooooo will there be any dates 'webmaster' cuz ive been wanting cuff since i started bocking (a long time agooooo) or do i just need to wait this  one out

[webmaster]

We'e hoping these will be in stock by the end of Sept / Early Oct

[toddy]

we can all hope
  cant wait 

[Dark Knight]

ooo did he paitent protect them XD =

I thought Jeff Jay had them patent protected, but then poweriser copied them and now projump has copied them. So i'm completly lost   

Some artificial limb sometimes use something more or less the same and back in 1954 cuffs where used on "pogo-stilts". So you must be real lost ! 

[Jason]

I would imagine that some form of "Cuff" has been about since the first idiot decided that walking on stilts was a good idea even if it was just a length of rope to tie your leg in place

So patenting them as just a cuff would run into loads of problems but as an attachment to Bocks they could have a patent but it would be easy to get round if they could fit something else

A bit like snowboard bindings try patenting them now and you will find it hard unless they are radicaly different to all other bindings

The cost is normaly due to them being made in low numbers, if you have one made it costs a fortune, a short production run a lot less and full blown mass production cuts the costs by massive amounts

Sadly we are in the small production bit heading to the mass production league if they start to be fitted as standard
So they are gonna be expensive just like the first Bocks started at £600+ and are now down to £135

so the more of us that buy them the cheeper they will become 

Jason 

[W3bbo]

I'm right about to put myself down for the pre-order but I've a few questions:

a) They're compatible with 7Leagues T-Rex right? I know the kneebar assembly/ is pretty much standard across all the manufacturers, but I wanted to be sure.
b) How secure are the cuffs? The photo on the page ( http://www.pro-jump.co.uk/images/naz/PJ-CC.jpg ) doesn't show how the cuffs are attached to the new bars. Also, with the bars no-longer physically attached to each other is it more or less stable? (there's also the unpleasant possibility of impaling yourself on a bar, lovely ).

But I take it these things will be the best thing ever since sliced bocks bread?

[Jason]

I have fitted Cuffs to 7's on 2 ocations and you will need to get a set of the Pro-jump clamps (just the plastic bits but it might be worth getting the bolts as well)

The plastic clamps on the 7's are very thin and seem to be made of a softer plastic and when I tried to tighten them enough to stop the bars moving they just distorted but the Pro-jump ones are made of sterner stuff and seem to hold the bars well

The cuffs are bolted to the bar with a large washer on the inside so they shouldn't part company and if you did put enough stress on them to break the bolt I think you would have busted you leg by that time 

The bars are so close to your leg you won't impail yourself on them and if you have thin legs they make it a lot easier than the hoops as you can put them closer together so you don't have to walk bow legged 

Jason 

[hybrid_hex]

The mod master strikes again! I'm looking into getting these aswell, but not too sure how secure they will feel!

[XS]

The mod master strikes again! I'm looking into getting these aswell, but not too sure how secure they will feel!

they will feel more secure than a kneebar with any number of straps, and they'll be more comfortable at the same time.  Cuffs Rock.

[Jack]

i want some but damn its all jusy money money money!!!!

jack

[adamessex]

Any more accurate dates??? it's all but the end of september.

[acroair]

i have a pair for sale , only used once as could'nt get on with them , unfortunatley don't have the alloy clamps ,

but open to offers .

chris

[Dark Knight]

The mod master strikes again! I'm looking into getting these aswell, but not too sure how secure they will feel!

they will feel more secure than a kneebar with any number of straps, and they'll be more comfortable at the same time.  Cuffs Rock.

I don't even need to use the standard strap and I've tried a cuff and found it dug in my leg and couldn't get it comfortable 

[Jack]

i have a pair for sale , only used once as could'nt get on with them , unfortunatley don't have the alloy clamps ,

but open to offers .

chris

they from the riSer 08s? nd how much u want?

jack

[chocl8]

to late jack, they are mine! 

[Jack]

f*ck u chocl8 u whore

lol