Author Topic: How to spot what Pro-Jump version you have (Read 43074 times)

webmaster · « **Reply #25 on:** January 25, 2008, 11:02:38 PM »

To be honest the whole "Gen 1" & "Gen 2" theories confused a lot of people, there was a lot of inaccuracies and most of it was just speculation. As you can see there's about 6 versions of pro-jumps so you could call it 6 gens... so in the 2 gen theory you missing a lot of detail out!!!

For spares easiest way to determine what you need is check which version of Pro-Jumps you have and cross reference it with the hoofs you had then ask yourself two questions:

1. "was it straight or did it have a bend in them?" and
2. "are they the bolt on ones or not?"

And if you need help I'm always here

Spud · « **Reply #26 on:** January 25, 2008, 11:33:20 PM »

I think it is now sorted

You are a helpful bunch on here

Spud · « **Reply #27 on:** January 25, 2008, 11:42:57 PM »

Ok more confused! My foot pat is straight but the hoof looks like the gen 1 type hoof

webmaster · « **Reply #28 on:** January 26, 2008, 12:16:29 AM »

Thats why I'm saying forget about the Gen1 / Gen2 theory, think of it as either indented or straight, if you get a picture up for me I'll tell you what you have & need

Rocketbat · « **Reply #29 on:** January 26, 2008, 12:25:44 AM »

mine are either 5s or 6s

webmaster · « **Reply #30 on:** January 26, 2008, 12:55:25 AM »

How to tell if they are V5 or V6 is if you look at the hoofs, the V5 ones the metal sole plate doesnt fully cover the rubber, but on the V6 the metal sole plate is about longer so the whole rubber part is covered up!

GRS · « **Reply #31 on:** January 27, 2008, 12:54:12 AM »

Great chart, in the family we have a set of V2's and V4's
I've always thought the two Gen theory was bull lol

Spud · « **Reply #32 on:** January 27, 2008, 07:02:35 PM »

It still confuses me lol...as long as I keep using tire socks then no probs hehe

Nero · « **Reply #33 on:** January 29, 2008, 08:47:02 PM »

mine are not pj's but look closer to the v2's

chocl8 · « **Reply #34 on:** February 05, 2008, 08:59:54 PM »

I have a tad problem, i have the feet below...which according to the table of hooves, Pro jump have never sold as spares or as a full pro-jump. They came with the original Pro-jumps i bought. I only ask because of the rubber tab at the top ( i presume this was pre white spacer?) Anyhoo my question is, brought some raptor springs and because of the rubber flap attached to the hoof, the holes don't line up to put the bolt through, so if i cut off/removed the rubber flap would this damage the springs in any way? As prev/current versions of the hoof have no rubber I also notice that the 7's springs don't have any rubber covering where this part is. Any help....plz?

hybrid_hex · « **Reply #35 on:** February 05, 2008, 09:02:35 PM »

I had the same trouble, but I have a PoweriZer frame, and had to trim the rubber to fir Pro-jump springs in, I havent noticed any trouble . . . . yet . . ..

chocl8 · « **Reply #36 on:** February 05, 2008, 09:05:54 PM »

How long have you had them changed? And do you have the same hoof?

hybrid_hex · « **Reply #37 on:** February 05, 2008, 09:07:56 PM »

Fitted them at the start of December, Im not sure if its the same hoof, but as soon as I trimed the top tab (held on by two rivets) then they fitted and worked fine! Ive used them loads, in nice hot places!! hehe!

chocl8 · « **Reply #38 on:** February 05, 2008, 09:10:04 PM »

Good, well sounds like it shouldn't be a problem, i might try and fit a thinner piece in instead, don'y want to wreck my new £130 springs...

webmaster · « **Reply #39 on:** February 05, 2008, 09:39:11 PM »

Aghh I was sure I covered everything, never seen a pro-jump with the extra metal tab across the top so I think you may have a rogue pair

I even checked with the parts guy, and he was certain we never sold any with the extra tab $:-\$

Anyway the rubber bit comes with all pro-jumps, and you should be able to take it off, but make sure with Trip first thou as he should be able to help.

hybrid_hex · « **Reply #40 on:** February 05, 2008, 09:42:28 PM »

haha! lol! Its just like in Black Adder, when he keeps coming up with word to get put into the dictionary! (If you have seen the episode)

Sx Nutta · « **Reply #41 on:** February 05, 2008, 09:42:59 PM »

I never knew about the extra tab, as I thought that another brand was using them for spares! Blackadder is cool, sausages!!

hybrid_hex · « **Reply #42 on:** February 05, 2008, 09:44:32 PM »

'The slug ballencing act was rather good!'

'Wibble!'

chocl8 · « **Reply #43 on:** February 05, 2008, 09:46:11 PM »

Wow a rogue pair....oooo, i checked the chart btw and they are version 1a's mabs they are prototypes...as i didn't exactly get them off the website, a friend ordered them for me. Ah well think i've got it sorted now, cheers for the help

.

Ps is tht the episode where he ends up burning the dictionary?

webmaster · « **Reply #44 on:** February 05, 2008, 09:48:09 PM »

Sent you a pm Chocl8 see if you can sort me some pics and that out, its got me puzzled lol

hybrid_hex · « **Reply #45 on:** February 05, 2008, 09:51:44 PM »

Quote from: chocl8 on February 05, 2008, 09:46:11 PM

Wow a rogue pair....oooo, i checked the chart btw and they are version 1a's mabs they are prototypes...as i didn't exactly get them off the website, a friend ordered them for me. Ah well think i've got it sorted now, cheers for the help .

Ps is tht the episode where he ends up burning the dictionary?

YEP!

Dark Knight · « **Reply #46 on:** February 05, 2008, 10:03:38 PM »

Quote from: hybrid_hex on February 05, 2008, 09:51:44 PM

Quote from: chocl8 on February 05, 2008, 09:46:11 PM
Wow a rogue pair....oooo, i checked the chart btw and they are version 1a's mabs they are prototypes...as i didn't exactly get them off the website, a friend ordered them for me. Ah well think i've got it sorted now, cheers for the help .

Ps is tht the episode where he ends up burning the dictionary?

YEP!

They could be bad copies

Joke

webmaster · « **Reply #47 on:** February 06, 2008, 12:17:14 AM »

Dont worry wasnt a rogue pair, his dont have the metal bar across just a little confusion

Glad thou as I would have had to revise the tables again and they were a killer to do

Nero · « **Reply #48 on:** March 20, 2008, 12:14:11 PM »

anyone changed the hoof for a newer version?

wiimii · « **Reply #49 on:** March 20, 2008, 12:43:07 PM »

ive got v4's

News:

Author Topic: How to spot what Pro-Jump version you have (Read 43074 times)

Dark Knight