I'm getting together some templates for the Slippies (Thanks for the silly name Naz I couldn't have done better myself
)
I need to make them a bit adjustable as different people wrap their springs to different widths, the overlap on the velcro can give about 1/2" adjustment but needs to be right
Don't know how much they would cost to make the first two sets took ages but with the templates and a plan it should get a lot shorter
As for the Flame design I did try to do this on the first set but I couldn't find a flame design that looked any good on the springs they are to narrow
So if any of you budding artists know of or can draw a good Flame design (I would like a set too) black going into red ,yellow and white would be good then the white would be at the top and stay clean
The Banned Bockers design was printed on a fairly thin material and I don't think they will last long but the Pro-jump ones were on a good cotton twill and should last a fair while
I have a few days off this week so I should be able to get to the shop that i bought the good stuff from and see if they have any other colours (like black) and if there is enough interest I'll work out a price