Pro-Jump PowerBocking Jumping Stilts Forum - Community for Power bocking / Pro Jumping!

YOUR JUMPING STILTS => Setting Up & Adjusting Your Stilts => Topic started by: super-spring on October 21, 2012, 03:48:25 PM

Title: Keeping your stilts working.
Post by: super-spring on October 21, 2012, 03:48:25 PM

guess whos back to bother you again with more questions haha. Away to tighten my stilts and make sure there still working okay because never really tightened them up or done anything to them so is there any main areas or any main bolts or something that i should clean or tighten to make sure everything is in tip top condition haha cheers guys :D

Title: Re: Keeping your stilts working.
Post by: SNuD on October 22, 2012, 12:59:40 AM

I would suggest you go over every one and make sure it’s tight. Don’t overdo it, just make sure nothing is coming loose. They do have a habit of slackening off and dropping nuts when you’re out without a replacement. A little spray with PTFE or a silicone lub spray on the moving joints helps as well. Don’t use oil like WD40, very messy! And if they are starting to clunk or have too much play in the joints get a spares kit off Naz.
 :CGEEK:
http://www.ghostbikes.com/products/PowerBock-Shop/2856-adult-pro-jump-cz-series-maintenance-kit.html
 :Cyes:

Title: Re: Keeping your stilts working.
Post by: super-spring on October 22, 2012, 07:09:46 PM

thanks SNuD will do :)

Title: Re: Keeping your stilts working.
Post by: Jason on October 22, 2012, 08:34:51 PM

Good advice there SNuD agree with all of it

Jason  :Hoofies2: :CGEEK:

Title: Re: Keeping your stilts working.
Post by: Locky on October 22, 2012, 11:04:48 PM

Jordan, the kit is only good for exo's which you dont (yet) have.