Pro-Jump PowerBocking Jumping Stilts Forum - Community for Power bocking / Pro Jumping!
YOUR JUMPING STILTS => Setting Up & Adjusting Your Stilts => Topic started by: christoph83 on April 23, 2010, 09:11:14 PM
-
Hey , ive just got my my first set of pro jump +'s n i was just wondering whats the rite height to set my calf cuffs on my leg
-
I think it says in the manual. But anyhoos...I think its about 4 inches below your knee. Use that number as a guide and try it. Then move the cuffs up or down into a position you are happiest with.
-
cool , thanks alot ill give them a try
-
But dont do what I did and not do them up correctly and end up with no stilt on one foot in the air :P its not fun :D especially when showing off to oldies ;)
DC
-
:Cwideeyed: lol ouch , that doesnt sound like fun
-
I found an easy way to set mine up
Loosen the brackets and put one stilt on then do the cuff up loosely and bend your knee
Push the cuff down until it dosen't hurt the back of your knee and then tighten the bracket enough to stop the bars sliding
You can then push the bars left and right to ballance them but they will stay at the right height
Remove that bock and repeat with the other one
Jason :Hoofies2: :CGEEK:
-
Settle it according to your easiness.